更新時間:2024-11-10
DPSK針盤式扭力起子麵向小容量的普通緊固作業(ye) 、扭力檢查、破壞性實驗等,在易操作、易讀取方麵*。 DPSK(Ⅱ)《標準型》· 小容量的扭力螺絲(si) 起子,Z適合普通緊固作業(ye) 、扭力檢查、破壞性實驗;· 使用方便為(wei) Z大瞄準點,扭動扭力杆,通過直觀的圓形刻度板直接讀數;· 左右兩(liang) 邊方向都可以使用;· 帶有左右兩(liang) 用的動針;· 刻度板較大,讀取讀數十分方便
免費谘詢:0755-23217122
DPSK針盤式扭力起子
DPSK針盤式扭力起子
DPSK(Ⅱ) 《透明刻度板型》
· 因采用了透明刻度板,所以在操作時能方便、清楚地看到刀頭的工作情況 ;
· 各型號同一保證精度為(wei) +-3%以內(nei)
For small-capacity general tightening torque checked, destructive experiments, etc., easy to operate, easy to read excel。
DPSK (Ⅱ)
· Small capacity torque screwdrivers, most suitable for general tightening torque checked destructive experiments;
·Easy to use for maximum aiming point, twisting the torsion bar, the circular scale plate through an intuitive direct reading;
·You can use the left and right directions;
·Moving around with a dual needle;
·Large scale plate, very convenient readings
·DPSK (Ⅱ)
·Due to the use of the transparent scale plates, so the operation can be easily and clearly see the operation of the tip;
·Various models within the same guarantee accuracy of + -3%
技術參數Parameters
型號Type | 負載範圍 Load range(kgf.cm) | zui小刻度 Min scale(kgf.cm) | 型號 Type | 負載範圍 Load range(kgf.cm) | zui小刻度 Min scale(kgf.cm) |
1DPSK | 0.2~1 | 0.025 | 5DPSK | 10~50 | 2 |
2DPSK | 0.5~2 | 0.05 | 10DPSK(Ⅱ) | 2~10 | 0.2 |
5DPSK | 1~5 | 0.2 | 20DPSK(Ⅱ) | 5~20 | 0.5 |
10DPSK | 2~10 | 0.2 | 50DPSK(Ⅱ) | 10~50 | 2 |
20DPSK | 5~20 | 0.5 |
|
|
|
betway官网app
地址:深圳市龍華新區上油鬆尚遊公館1821-1822
主營產(chan) 品:模擬製式信號發生器TG39BX(54200),DVB-T2數字信號發生器SFU(MSD5000A),CA-410(CA310)色彩分析儀(yi)
版權所有:betway官网app 備案號: 總訪問量:315892 站點地圖 技術支持: